Combustion Analyzers
Combustion analyzers are essential diagnostic tools for HVAC technicians, contractors, and service professionals working with boilers, furnaces, burners, and other fuel-burning equipment.
Dynamic Agencies is the exclusive North American distributor of Systronik combustion analyzers, providing advanced diagnostic technology with the knowledge and support professionals rely on.
We are also a premier provider for calibration services.
1. Emissions Analyzers
Measure and analyze combustion gases for efficiency, safety, and regulatory compliance.
BLUELYZER® C1 Starter Set (O2, CO)
P00212
Flue gas analyzer kit for oil and gas fuels for setting up heating systems.
BLUELYZER® C1 Pro Set (O2, CO+, draft, pressure)
P00213
Optimal for HVAC professionals for accurate adjustments or inspections of oil, gas and solid fuel heating systems.
BLUELYZER® C1 NOX Set (O2, CO+, NOlow, draft, diff. pressure)
P00214
Flue gas analyzer kit for all fuels to set up heating systems as well for NOx measurements (e.g. for CHPs).
EUROLYZER® S1 Starter Set (O2E, CO/H2-compensated, draft)
P00140
Robust and high quality flue gas analyzer set to setup oil, gas and pellets-fired heating systems.
EUROLYZER® S1 Pro Set (O2E, CO/H2+, Draft, Pressure)
P00141
Professional and robust flue gas analyzer set for servicing and inspecting oil, gas and pellets-fired heating systems.
EUROLYZER® S1 NOX Set (O2E, CO/H2+, NO, Draft, Pressure)
P00147
Professional and robust flue gas analyzer set to service and inspect oil, gas and pellets-fired heating systems as well for NOx measurements (e.g. for CHPs).
EUROLYZER® S1 Allrounder Set (O2E, CO-high, draft)
P00179
Robust and high quality flue gas analyzer set to setup oil, gas and solid heating systems.
EUROLYZER® S1 Expert Set (O2E, CO/H2+, Draft, FP, GP, Pressure)
P00180
Professional and robust flue gas analyzer set for servicing and inspecting oil, gas and pellets-fired heating systems.
2. CAPBs® Handle
CAPB’s handheld emissions analyzer provides fast, accurate combustion and emissions testing in a compact, easy-to-use device.
CAPBs® module
M091000017
Universal base handle for all CAPBs® sens sensor units, with direct Bluetooth® connection to the EuroSoft® live app, which is available on both the Android and iOS platforms.
CAPBs® device basic set
P00052
The CAPBs® device set including the CAPBs® interface basic is a display unit for all CAPBs® sens.
CAPBs® interface basic (IF10)
M094003910
Interface unit IF10 for charging, power supply and firmware update of the CAPBs® device.
CAPBs® device logger set
P00100
The CAPBs® device set including the CAPBs® interface logger is a display unit for all CAPBs® sens.
CAPBs® interface logger (IF20)
M094003911
Logger unit IF20 for logging, charging, power supply and firmware update of the CAPBs® device.
CAPBs® device
M093000010
The CAPBs® device is a display unit for all CAPBs® sens. CAPBs®are modular: Different sensor units can be connected, resulting in numerous application solutions.
3. Pressure
Precision instruments for measuring gas, air, water, and system pressures.
S2600®
M061
The high-precision S2600® series instruments for pressure and differential pressure measurements.
S4600 ST series
M066
The state of the art BlueLine® S4600 ST pressure measuring instruments feature Bluetooth®, QR code and microSD for data transmission.
S4650 ST Set – pressure and leakage measuring set
P00096
Ready-to-use test set for professional tightness tests.
S4602 ST Set up to 20 hPa
P00085
S4602 ST Set for ultra-low pressure and differential pressure measurement.
S4601 ST Set up to 150 hPa
P00084
S4601 ST Set for low pressure and differential pressure measurement.
S4610 ST Set up to 1 bar
P00086
S4600 ST Set for pressure, vacuum and differential pressure measurement.
S4650 ST Set up to 5 bar
P00087
S4650 ST Set for high pressure, vacuum and differential pressure measurement.
S4680 ST Set up to 8 bar
P00089
S4680 ST Set for high pressure, vacuum and differential pressure measurement.
CAPBs® sens PS10
M090050110
Sensor unit for measuring fine pressure and differential pressure up to 20 hPa. Also designed for accurate air-flow measurements using a Pitot tube.
CAPBs® set PS10 – air flow measurement
P00066
Set including the Pitot tube for accurate air-flow measurements.
CAPBs® sens PS20
M090010110
Sensor unit for measuring the pressure, vacuum and differential pressure of non-corrosive, gaseous, dry media. This pressure sensor measures up to 180 hPa, and features two D8 pressure connections.
CAPBs® sens PS22
M090013410
Sensor unit for tightness and load testing up to 180 mbar test pressure. The CAPBs® sens PS22 is extremely accurate, orientation independent and temperature-compensated.
CAPBs® sens PS33
M090192910
DVGW-tested unit for leak tightness checks of gas pipes according to TRGI. This pressure sensor measures up to 2 bar, and features one D8 mm pressure connection.
CAPBs® sens PS40 | 41 | 42
M09008
Sensor unit for leaktightness and load testing up to 6 bar test pressure. The high quality sensors are extremely accurate, orientation independent and temperature compensated.
CAPBs® set PS40 – pressure and leakage measuring
P00098
Step-by-step guide through regulatory-compliant measurement menus.
CAPBs® sens PT70
M090142810
Sensor unit for leaktightness, load and stress testing up to 25 bar test pressure. Pressure transmitter for measurements in gaseous and liquid media.
CAPBs® set PT70 – water tightness test
P00040
For example pressure testing the underfloor heating system.
CAPBs® d-set PT70 – water tightness test
P00069
Complete tightness test kit for example for underfloor heating systems.
CAPBs® d-set PT70 – pressure logger
P00108
Complete data logger kit for pressure monitoring.
CAPBs® sens PT85
M090223510
Sensor unit for measurement of the pressure, vacuum and differential pressure of gaseous and liquid media. This pressure sensor measures up to 7 bar.
CAPBs® sens PT86
M090273510
Sensor unit for measurement of the pressure, vacuum and differential pressure of gaseous and liquid media. This pressure sensor measures up to 20 bar.
CAPBs® set PT85 – hydronic balance
P00171
Set for settings and re-measuring of the balancing valves.
4. Temperature
Accurate temperature measurement solutions for HVAC, industrial, and process applications.
TMD 7 (Diff. temperature)
M073000910
The (differential) temperature of liquids, surfaces or ambient air can be measured reliably, quickly and accurately with TMD 7.
TMD 9 set – flow and return temperature measurement
P00065
Robust and high quality flow and return temperature measurement set.
TMD 9 (Diff. temperature)
M071000916
This temperature measuring instrument provides datalogging on microSD card. Also Bluetooth® or QR Code for data transmission to the EuroSoft® connect App.
CAPBs® sens TK10
M090000810
Temperature transmitter with standardised temperature socket type K. This allows for the connection of all type K temperature probes.
CAPBs® sens TK11
M090000910
Temperature transmitter with two standardised temperature socket type K. This allows for the connection of all type K temperature probes.
CAPBs® d-set TK11 – temperature logger
P00110
Data logger set for differential temperature with two standardised temperature sockets type K, compatible to all type-K temperature probes.
CAPBs® set TK11 – heat pump
P00112
Set for flow and return temperature measurement on heat pumps.
CAPBs® sens TK20
M090002210
Sensor unit for temperature measurements in soft plastic media with the pointed penetration probe.
CAPBs® sens TK30
M090002310
Sensor unit for temperature measurements in liquids with the D1.5temperature probe.
CAPBs® sens TK35
M090002410
Sensor unit for measurement of the temperature in liquids with the D3 temperature probe.
CAPBs® sens TK40
M090002510
Sensor unit for air temperature measurements with the air probe.
CAPBs® sens TK50
M090002610
Sensor unit for surface measurements with the surface probe.
5. Gas Sniffer/Anode Tester
Detect gas leaks and test anode systems to improve safety and system performance.
GSP 4
503502
The portable gas detector GSP 4 is used to sniff out gas leaks of flammable gases in gas pipes as well as connection pieces and fittings, gas meters, gas burners and gas tanks.
CAPBs® sens GS10
M090131410
Sensor unit for fast and reliable gas leak detection. The flexible probe makes use in areas that are difficult to access possible.
CAPBs® d-set GS10 – gas sniffer
P00063
Set for detecting gas leaks.
CAPBs® sens GS11
M090311410
Sensor unit for fast and reliable gas leak detection, capable of detecting a wide range of flammable gases.
CAPBs® d-set GS11 – gas sniffer methane
P00264
Set for precise methane (CH4) leak detection.
CAPBs® sens GS15
M090321410
Sensor unit for rapid and highly sensitive detection of the flammable refrigerant R290 (propane), ensuring fast leak response in refrigeration systems.
CAPBs® d-set GS15 – gas sniffer R290 (propane)
P00265
Set for safe propane (R290) leak detection.
CAPBs® sens GS40
M090331410
Sensor unit for fast and reliable detection of halogenated refrigerants, ideal for refrigeration and air-conditioning systems.
CAPBs® d-set GS40 – gas sniffer halogenated refrigerants
P00266
Set for reliable halogenated refrigerant leak detection.
CAPBs® sens AT10
M090283910
Sensor unit for testing isolated built-in sacrificial anodes on hot water tanks.
6. Flow
Monitor and measure liquid and air flow rates for optimized system operation.
FlowTemp® STx
502002
The TÜV tested FlowTemp® STx is a intelligent and compact measuring device for determining the volume flow and water temperature at water taps.
FlowTemp® M
501910
FlowTemp® M is a very robust and high quality instrument for adjusting and optimising tankless water heater.
VA 100
525495
The VA 100 vane anemometer delivers precise air velocity and temperature measurements – including convenient volumetric flow calculation.
BlueAir-ST®
M080002016
BlueAir-ST® is ideally suited for measuring air flow, temperature and humidity, as well for state of the art data transmission via Bluetooth®, QR code and microSD card.
BlueAir-ST® Starter Set – micro
P00023
BlueAir-ST® set for checking and setting the air velocity of ventilation and air conditioning systems and fans and for measurements in ventilation and exhaust ducts.
BlueAir-ST® Starter Set – mini
P00022
BlueAir-ST® set for checking and setting the air velocity of ventilation and air conditioning systems and fans and for measurements in ventilation and exhaust ducts.
BlueAir-ST® Starter Set – macro
P00024
BlueAir-ST® set for checking and setting the air velocity of ventilation and air conditioning systems and fans and for measurements in ventilation and exhaust ducts.
CAPBs® set PT85 – hydronic balance
P00171
Set for settings and re-measuring of the balancing valves.
CAPBs® sens FP10
M090053210
Sensor unit for air flow speed and volumetric flow rate and temperature measurement. Also for 4-Pa testing using the CAPBs®module.
CAPBs® set FP10 – air flow measurement
P00067
Set including Pitot pipe for air flow speed and volumetric flow rate and temperature measurement.
CAPBs® set FP10 – 4 Pa test
P00119
Set including hose kit for performing 4 Pa test in buildings.
CAPBs® set TK11 – heat pump
P00112
Set for flow and return temperature measurement on heat pumps.
7. Air Quality
Analyze indoor and outdoor air conditions to support healthy environments.
CAPBs® sens AQ35
M090230010
Sensor unit for measurement of carbon dioxide (CO2). The highly accurate CO2 infrared sensor has a very low drift and can be adjusted in fresh air.
CAPBs® sens AQ36
M090260010
Sensor unit for measurement of carbon dioxide (CO2), humidity and temperature. The highly accurate CO2 infrared sensor has a very low drift and can be adjusted in fresh air.
CAPBs® d-set AQ36 – IAQ logger
P00107
Complete IAQ logger kit for monitoring of carbon dioxide (CO2), humidity and temperature. The highly accurate CO2 infrared sensor has a very low drift and can be adjusted in fresh air.
CAPBs® sens CO30
M090163310
Sensor unit for fast and reliable detection of carbon monoxide (CO) in ambient air.
8. Water Quality
Test and monitor water chemistry, purity, and overall system performance.
CAPBs® sens WQ10
M090251310
Sensor unit for determining water quality and assessing the system water in heating systems. Measurement of pH, electrical conductivity and temperature.
CAPBs® set WQ10 – water quality
P00032
Set for determining water quality and assessing the system water in heating systems (VDI 2035).
CAPBs® sens WQ11
M090291310
Sensor unit for determining water quality and assessing the system water in heating systems. Measurement of electrical conductivity, hardness and temperature.
CAPBs® set WQ11 – water quality
P00134
Set for determining water quality and assessing the system water in heating systems (VDI 2035).
9. Refrigerants
Tools for detecting, measuring, and servicing refrigerant-based systems.
EUROFOLD® M4 set
P00252
The EUROFOLD® M4 set provides a comprehensive all-in-one solution for professional refrigeration and HVAC technicians.
SC 100
525551
The SC 100 electronic refrigerant scale provides precise, consistent, and reliable weighing for refrigerant charging and recovery applications.
CAPBs® set TK11 – heat pump
P00112
Set for flow and return temperature measurement on heat pumps.
By measuring key combustion parameters and flue gas values, combustion analyzers help technicians evaluate system performance, identify potential issues, verify proper operation, and support efficient equipment setup and maintenance.
Systronik combustion analyzers are designed for professional field applications where accurate measurements, dependable performance, and ease of use are critical. Whether commissioning new equipment, performing routine HVAC maintenance, troubleshooting combustion problems, or checking system efficiency, the right combustion analyzer provides technicians with valuable data to make informed adjustments.
As North America's exclusive distributor, Dynamic Agencies offers Systronik combustion analyzers for HVAC and combustion professionals looking for reliable testing equipment. Contact Dynamic Agencies to discuss available models and find the right combustion analysis solution for your application.
Ensure your Systronik instruments continue to perform with accuracy and reliability through professional calibration services. Our team provides precise, standards-compliant calibration to help maintain performance, extend equipment life, and support your operational requirements.
Saskatchewan: 1-306-343-1901
